Full Automatic Workover Rigs
Upright mast without guy line and self-balancing crown block are adopted, and the deflection of loaded crown block is reduced by 80% compared with conventional models.
Product introduction
The traveling block moves with the guide rail of the mast, with small shaking and high efficiency of tubular handover
The main rig is equipped with 4nos. stepping wellhead centralized devices, which can realize the adjustment of 10 mm level at the wellhead
Key features
Short factual bullets extracted from the source text.
- Equipped with pipe delivery unit from horizontal to vertical, theefficiency is increased by 20% compared with the conventional
- Sucker rod processing automation, equipped with visual wellhead stage detection system, to improve the tubing handling automation
- Automation should support repeatable field operation.
- Drive and mast handling need to stay coordinated.
- Layout should still be practical to maintain on site.
Application
SXJ900DB high-efficiency full-automatic workover operation equipment adopts a new type of vertical self-balancing mast and traveling system with guide rail, and is equipped with a new type of vertical pipe handling system. It upgrades the automatic control system in an all-round way to realize the tubing processing efficiency > 50 jts/hr in workover operation,the automatic operation of sucker rod, and the one-key operation of tubular processing.
Product parameters
| Parameter | Unit | Value |
|---|---|---|
| Model | - | Full Automatic Workover Rigs |
| Rig Type | - | Workover rig |
| Mounting Type | - | Model dependent |
| Mast Type | - | Model dependent |
| Drive System | - | Model dependent |
| Mobility | - | Model dependent |
| Working Condition | - | Land field operations |
| Application | - | Well servicing and workover operations |
| Deployment Type | - | Field mobile installation |
| Key Advantage | - | Matched to relocation, mast handling, and field adaptation requirements |
What buyers check before shortlist
Practical points that help compare this model family with the site condition and installation plan.
- Full Automatic Workover Rigs should be checked for mobility, drive system, and field setup time.
- Upright mast without guy line and self-balancing crown block are adopted, and the deflection of loaded crown block is reduced by 80% compared with conventional models.
- The traveling block moves with the guide rail of the mast, with small shaking and high efficiency of tubular handover.
How to read this model
A short buyer-oriented note for the models that otherwise read too thin.
Full Automatic Workover Rigs is a control-focused workover rig intended to reduce manual handling during servicing work.
The buyer usually wants to know what the automation changes in practice, including drive control, mast handling, and relocation steps.
A useful page should explain the operating effect of the automation rather than repeating the model name.
Integration with the driller control system matters because the rig has to stay understandable for the crew on site.
The strongest pages show how automation changes labor intensity, safety, and repeatability at the wellsite.
How buyers should read this model
A tighter reading guide for shorter product pages.
Full Automatic Workover Rigs should be compared on hook load, mobility, and drive system before the buyer worries about model suffixes.
Cold-weather, desert, mountain, and battery storage versions solve different operating problems, so the site condition must stay visible.
The buyer usually wants to know whether the rig can move, set up, and handle the target well program without excessive support work.
A workover page is more helpful when it says how the rig handles relocation, mast work, and the day-to-day service cycle.
The practical question is whether the rig can stay productive on the route and pad arrangement the project actually uses.
The page should also show whether the rig favors fast movement, lower fuel reliance, or a more stable service rhythm.
A buyer can usually rule out a rig faster when the climate adaptation or terrain handling is stated plainly.
If the rig is built for a special route or well program, that context should be visible before the feature list starts.
A workover page also needs to show whether the package is optimized for quick intervention or for repeated service cycles.
If the model is a special fuel or automation version, the buyer should see the trade-off with service access and operating rhythm immediately.
Route movement, pad staging, and maintenance access are the practical deciders on many workover projects.
The best comparison is the one that keeps those factors visible alongside hook load and drive system.
Related reading
Move from the model page to the guidance that explains the same buying family.
Workover Rigs
Back to the category guide
NewsCold-weather and desert rigs solve different problems
Climate adaptation is not cosmetic; it affects insulation, filtration, heating, and mobility choices.
FAQHow do I choose the right model?
Start from the working condition, target capacity, mounting type, and control preference. Then compare the category-specific fields on the product page before asking for a quotation.
Related products
Same category options and adjacent use cases.
Full Electric Drive Automated XJ350 Workver Rigs
Internal Guyline Workover Rig
Free Standing Workover Rig
Tell us the operating condition, target output, or installation constraint and we will point to the matching model.
Contact Us